User Manual

Chapter 12. Internal effects
127
7. In the row of buttons at the top of the screen, click
either the IN 1-48 button or the IN 49-96 button
{on the 48 channel mode, this button has no effect},
and then click the button for the channel that you
wish to patch to the L output of the effect.
When you click the button, you will return to the
previous screen. As necessary, assign a MIX channel
to the R output of the effect as well.
Hint
If one side of a ST IN channel (or of two paired input
channels) is patched to the L output of the effect, the
other side of the ST IN channel (or paired input
channel) will automatically be patched to the R out-
put of the effect.
8. Adjust the send level of the signal that is sent from
the input channel to which the input source is con-
nected to the MIX bus patched to the effect.
Hint
To raise the MIX send level, you can either use the
INPUT block (or ST IN block), or the SELECTED
INPUT CHANNEL block. By using the MIX SEND
[PRE] switch located in the SELECTED INPUT
CHANNEL block, you can select whether to send the
pre-fader or post-fader signal for each input channel.
For details refer to “Chapter 4. Basic operation for
input channels.”
9. In the MIX OUTPUT block, turn on the MIX [ON]
switch for the corresponding MIX channel. Use the
MIX [LEVEL] encoder to adjust the master send
level of the effect.
Hint
If the MIX channels are paired, the left (odd-num-
bered) encoder will function as a MIX [BAL]
encoder to adjust the volume balance between the
two channels, and the right (even-numbered)
encoder will function as a MIX [LEVEL] encoder to
adjust the output level of the two channels in com-
mon.
For details refer to “ Chapter 5. Basic operation for out-
put channels .”
10. Turn on the [ON] switch for the input channel (or
ST IN channel) to which the L/R output of the effect
is patched, and use the fader to adjust the effect
return level.
Hint
The effect input/output levels can be viewed in the
EFFECT function screen.
PAIR
ON ON
MIX [LEVEL]
encoder
MIX OUTPUT block
MIX [ON]
switch