User Manual

CS1D Operating Manual (Start-up)
12
Connecting an analog input/output unit to the engines (Mirror
mode)
The following diagram shows a common way of making connections between the engine and analog input/output units
for Mirror mode.
1 Analog input unit AI8 connection
Connect the OUTPUT A connector of the AI8 analog
input unit to one of the INPUT 1–INPUT 10 con-
nectors of engine A, and connect the OUTPUT B
connector of the AI8 to one of the INPUT 1–INPUT
10 connectors of engine B.
• When using Mirror mode, OUTPUT connectors A
and B of the AI8 must be connected to the identi-
cally-numbered INPUT connector of engines A and
B. Be aware that if these are connected to differently-
numbered INPUT connectors, the content of the
input signals will change when you switch between
engines A and B.
• When using Mirror mode, leave the CONTROL
PORT switch of the AI8 in the A position as the
default setting.
2 Analog output unit AO8 connection
Connect the INPUT A connector of the AO8 analog
output unit to one of the OUTPUT 1–OUTPUT 6
connectors of engine A. Connect the INPUT B con-
nector of the AO8 to one of the OUTPUT 1–OUT-
PUT 6 connectors of engine B.
• When using Mirror mode, INPUT connectors A and
B of the AO8 must be connected to the identically-
numbered OUTPUT connector of engines A and B.
Be aware that if these are connected to differently-
numbered OUTPUT connectors, the content of the
output signals will change when you switch between
engines A and B.
• When using Mirror mode, leave the INPUT SELEC-
TOR switch of the AO8 in the A position as the
default setting.
• Be careful not to reverse the input and output. If you
do so, the unit will not be recognized, and cannot be
controlled.
ANALOG OUTPUT BOX ANALOG OUTPUT BOX
ANALOG INPUT BOXANALOG INPUT BOX
INPUT 1
INPUT 2
INPUT A INPUT AOUTPUT A OUTPUT A
INPUT B INPUT BOUTPUT B OUTPUT B
OUTPUT 1
INPUT 1
OUTPUT 1
OUTPUT 2
INPUT 2
OUTPUT 2
12
ENGINE A
(DSP1D-EX{DSP1D})
ENGINE B
(DSP1D-EX{DSP1D})
AI8 (ID=2) AI8 (ID=1) AO8 (ID=1) AO8 (ID=2)
WORD
CLOCK IN
WORD
CLOCK
IN
WORD
CLOCK IN
WORD
CLOCK IN
WORD
CLOCK IN
Clock Generator
CONTROL
PORT
Switch = A
CONTROL
PORT
Switch = A
INPUT
SELECTOR
Switch = A
INPUT
SELECTOR
Switch = A