User Manual

CS1D Operating Manual (Basic Operation)

142

Using time code to control events

On the PM1D system, speciﬁed scenes can be recalled when the LTC time code received at the TIME CODE IN connec-

tor (or the time code internally generated by the PM1D system itself) reaches a speciﬁed time location. Here we will

explain how to capture a time code time location, and how to assign the desired scene to that time location.

[Procedure]

1. Connect the time code output connector of the

external device to the TIME CODE IN connector of

the console (or engine).

• Time code connections between the PM1D system and the external device

2. In the LCD FUNCTION ACCESS block, press the

[MIDI/GPI/TC] switch several times to access the

following TC EVENT screen.

• TC EVENT screen (MIDI/GPI/TC function)

In the TC EVENT screen you can select the connec-

tor at which time code will be received, select the

frame rate of the time code, and assign a desired

scene number to a captured time location.

3. Use the buttons of the TIMECODE IN section to

select the time code source.

TIMECODE IN TIMECODE OUT

Console (CS1D)

External device

(MIDI sequencer/

recorder etc.)

LCD FUNCTION ACCESS

block

[MIDI/GPI/TC] switch