User Manual

148

Chapter 16. Various settings

This chapter explains various settings that allow you to customize the PM1D system.

Initial settings for the console

Here’s how to make initial settings that affect the basic operation of the CS1D console, such as track pad/mouse opera-

tion and operation within the display.

[Procedure]

1. In the LCD FUNCTION ACCESS block, press the

[UTILITY] switch several times to access the fol-

lowing PREFERENCE screen.

• PREFERENCE screen (UTILITY function)

2. Use the on-screen knobs and buttons to specify the

initial settings for each item.

The following items can be set.

a) MOUSE

Make settings for the track pad built into the CS1D

or the mouse connected to the MOUSE connector.

• TAPPING

Specify whether or not to enable tapping on the

built-in track pad.

• SPEED

Set the speed of pointer movement controlled by

the built-in track pad of the CS1 or a mouse con-

nected to the MOUSE connector.

b) LED BRIGHTNESS

Adjust the brightness of the LEDs on the CS1D.

c) GATE/COMP GR METER ON/OFF LINK

If this button is on, the on-screen GR meter will be

displayed or hidden according to whether the

internal compressor is turned on or off.

LCD FUNCTION ACCESS

block

[UTILITY] switch