User Manual

Chapter 16. Various settings
149
d) AUTO DISPLAY ON/OFF
Specify whether or not the corresponding screen
will appear in the display when a specific controller
in the SELECTED INPUT CHANNEL/SELECTED
OUTPUT CHANNEL section of the CS1D is oper-
ated. The following table shows the controllers
corresponding to each button and the screen that
will be selected.
e) CONFIRMATION ON/OFF
Specify whether or not a confirmation message
will appear when you perform a specific operation
on the CS1D.
Each button corresponds to the following opera-
tions.
Even if the RECALLING button is turned on, using
the following methods will cause the scene to be
recalled without a confirmation message.
● Recall via MIDI program change
● Recall from the TC EVENT screen
● Direct recall
● Recall using a USER DEFINE switch
f) WARNING MESSAGES ON/OFF
Specify whether or not a warning message will
appear when an error occurs within the PM1D sys-
tem.
Each button corresponds to the following errors.
Hint
The settings of the PREFERENCE screen are main-
tained even when the power of the PM1D system is
turned off. If the SETUP button of the UTILITY
function LOAD/SAVE screen is turned on when sav-
ing data to a memory card inserted in the PC ATA
STORAGE CARD slot of the CS1D, the settings of
the PREFERENCE screen will be saved on the card as
well.
Button Controller Selected screen
INSERT/UNIT
button
[INSERT] switch INSERT/DIRECT
VIEW or
INSERT VIEW
UNIT-related
controllers
HA/INSERT
EQ button ATT, EQ-related
controllers
EQ PARAMETER
GATE/COMP
button
Gate/compressor-
related controllers
GATE PRM /
COMP PRM
DELAY button Delay-related con-
trollers
IN DELAY / OUT
DELAY
ROUTING button Routing-related
controllers
PAN/ROUTING /
MATRIX/ST or
OUT CH VIEW
FADER button Input/output chan-
nel faders and [ON]
switch
IN CH VIEW / OUT
CH VIEW
CUE/SOLO
button
Input/output chan-
nel [CUE] switches
IN CH VIEW / OUT
CH VIEW
OSCILLATOR
button
[OSC ON] switch,
[OSC OUT] switch
OSCILLATOR
d)
e)
f)
Button Operation
PATCH button Patching changes in the OUT PATCH
screen/IN PATCH screen
RECALLING
button
Scene or library recall operations
STORING button Scene or library store operations
Button Error
TC DROP A dropout occurred in the time code.
DIGITAL I/O A digital audio signal not synchronized
with the PM1D system was input.