User Manual

SELECTED INPUT CHANNEL block
37
2 MODULE [FLIP] switch
This switch exchanges (flips) the operating channels
between vertically adjacent INPUT blocks or verti-
cally adjacent ST IN channels.
Depending on the on/off status of this switch, the
channels operated in the INPUT blocks and the ST
IN block will change as follows.
• When the MODULE [FLIP] switch is off (default)
• When the MODULE [FLIP] switch is on
The status of this switch will always be shown at the
bottom of the display.
For details refer to “CS1D Reference manual (Soft-
ware).”
3 PHONES MONITOR A/MONITOR B jacks
These are headphone jacks for monitoring MONI-
TOR A and MONITOR B.
Do not use both the headphone jack on the top
panel and the headphone jack on the front panel at
the same time. Doing so can cause the CS1D to
malfunction due to excessive current.
CH 13-24
CH 1-12
CH 37-4834
12 CH 25-36
INPUT blocks 1/2 INPUT blocks 3/4
ST IN block
CH 1-12
CH 13-24
CH 25-3612
34 CH 37-48
INPUT blocks 1/2 INPUT blocks 3/4
ST IN block