User Manual
Function menu
7
• METER
Make settings for the meters on the top panel of the
CS1D, the meters in the meter bridge block, and the
meters that appear in the display (→p.58).
• MON/CUE
Make settings for talkback, the internal oscillator,
and monitor/cue (→p.62).
2 Output functions
These buttons access functions related to the output
channels (MIX channels, MATRIX channels, STE-
REO A/B channels).
The content of each function is described below.
(The abbreviated function name shown in the dis-
play is given in parentheses.)
• PATCH (OUT PATCH)
Assign output units to output channels (→p.76).
• INSERT (OUT INSERT)
Make insertion settings for output channels
(→p.86).
• EQ (OUT EQ)
Make EQ settings for output channels (→p.89).
• COMP (OUT COMP)
Make compressor settings for output channels
(→p.93).
• DELAY (OUT DELAY)
Make delay settings for output channels (→p.99).
• DCA/MUTE (OUT DCA/MUTE)
Assign output channels to DCA groups or mute
groups (→p.101).
• MATRIX/ST (MATRIX/ST)
Make routing settings for MIX channels → MATRIX
bus / STEREO bus, SUB IN → MATRIX bus. Here
you can also make LCR mode settings for the MIX
channels (→p.105).
• CH VIEW (OUT CH VIEW)
Here you can view the parameters for a single output
channel. You can also edit the channel parameters
(→p.114).
2