User Manual
Global functions
18
SCENE functions
Operating scene memories
MEMORY
[Function]
Store mix parameters into a scene memory, or recall a previously-stored scene.
■ Console
In the LCD FUNCTION ACCESS
block, press the [SCENE] switch
(press repeatedly until the screen
shown at the right appears)
■ Display
MENU button → SCENE button →
MEMORY tab
[Screen functions]
1 Scene list
This is a list of the scenes stored in scene memory.
If the EVENT RECALLING button is set to
“ENABLE” in the TC EVENT screen of the MIDI/
GPI/TC function, the buttons and LINK button
will be grayed and cannot be used.
You must first set the EVENT RECALLING button
to “DISABLE.”
Each scene contains the following elements.
• No. (scene number)
This is the scene number. The scene numbers of the
PM1D consist of an integer portion of 00–99 and a
decimal portion of .0–.9, together covering a range of
00.0–99.9 to handle 1,000 scenes. Of these, new
scenes can be stored in numbers 01.0–99.9.
• TITLE
The name assigned to each scene
• PROTECT
This button switches protect on/off for each scene.
A scene for which Protect is on cannot be overwrit-
ten.
1