User Manual

Global functions

OSCILLATOR

[Function]

Switch the internal oscillator on/off, and select its assignment destination. The internal oscillator can be used

to measure the acoustical response of the concert hall, or to match levels with external devices.

■ Console

In the LCD FUNCTION ACCESS

block, press the [MON/CUE] switch

(press repeatedly until the screen

shown at the right appears)

■ Display

MENU button → MON/CUE but-

ton → OSCILLATOR tab

[Screen functions]

1 Level meter

This level meter shows the output level of the oscilla-

tor.

2 OSC LEVEL (oscillator output level)

This knob adjusts the output level of the oscillator.

The range is from – 96 – 0 dB.

3 OSC ON/OFF (oscillator on/off)

This is an on/off switch for the oscillator.

This switch is linked with the [OSC ON] switch

located on the CS1D top panel.

4 OSC OUT

In this section you can patch the oscillator signal to a

physical output jack for direct output.

When you click button, the OSC DIRECT OUT

popup window will appear, in which you can select

the jack for direct output.

You can also use the ON/OFF button to switch the

direct output on/off. (The ON/OFF button is linked

with the [OSC OUT] switch located on the CS1D top

panel.)