User Manual

32
Connect an input source
Connect one of the following input sources according to the type of input unit or card that you wish to check.
• To check a mic/line input card (LMY2-ML)
installed in the AI8
Connect a line output device such as a CD player or
DAT recorder to input jacks 1A and 2A of the LMY2-
ML.
• To check an AD card (LMY4-AD) installed in the
AI8
Connect a line output device such as a CD player or
DAT recorder to input jacks 1/2 of the LMY4-AD.
• To check an input channel of a digital I/O card
(MY8-AT, MY8-TD, MY8-AE) installed in the DIO8
Connect the digital output connector of a DAT
recorder or digital MTR (multi-track recorder) that
matches the format of your digital I/O card. In this
case, make connections and settings so that the sig-
nals are sent from the recorder to input channels 1/2
of the digital I/O card.
INPUT UNIT NO.
PHANTOM MASTER
ON
OFF
+48V
POWER
ON/ OFF
12345 678
ANALOG INPUT BOX
ANALOG IN
CH2B
B
SIGNAL
MIC/LINE INPUT CARD MODEL LMY2-ML
B
SIGNAL
CH2A CH1B CH1A
LR
MIC/Line-Platine (LMY2-ML)
CD player/DAT recorder
AI8 input unit
INPUT UNIT NO.
PHANTOM MASTER
ON
OFF
+48V
POWER
ON/ OFF
12345 678
ANALOG INPUT BOX
ANALOG IN
CH4
SIGNAL
SIGNAL
AD CARD MODEL LMY4-AD
SIGNAL
SIGNAL
CH3 CH2 CH1
LR
CD player/DAT recorder
AI8 input unit
I/O UNIT ID
PORT B SELECTOR
5-8
1-4
POWER
ON/ OFF
DIGITAL I/O CARD MODEL MY8-AE
AES/EBU
DIGITAL I/O CARD MODEL MY8-AT
DAT
00.00.00.00
8-TRACK DIGITAL
DIGITAL I/O CARD MODEL MY8-TD
Tascam Digital Audio
Interface (TDIF-1)
WORD CLOCK OUT
OUT
IN
Digital-E/A-Platine (MY8-AT) Digital-E/A-Platine (MY8-TD) Digital-E/A-Platine (MY8-AE)
ADAT
INPUT 1/2 3/4 5/6 7/8
OUT
PUT 1/2 3/4 5/6 7/8
DIGITAL OUT (AES/EBU)
DIGITAL I/O
DIGITAL OUT
DIO8 digital input/output unit
TASCAM digital MTR
DAT recorder
ADAT digital MTR
(female) (male)
Special AES/
EBU cable for
the MY8-AE