User Manual

ManualsBrandsYamaha ManualsBrass & WoodwindsPM1

401

402

403

404

405

406

407

408

409

410

EFFECTGEQSCENEMIDI/GPI/TCUTILITY

SYS/W.CLOCK

METERMON/CUE

MON/CUE (monitor/cue) functions

2TR IN (2 track in)

[Function]

Make settings for the 2-TRACK IN jacks of the CS1D.

■ Console

In the LCD FUNCTION ACCESS

block, press the [MON/CUE] switch

(press repeatedly until the screen

shown at the right appears)

■ Display

MENU button → MON/CUE but-

ton → 2TR IN tab

[Screen functions]

1 Level meter

This level meter shows the input level from the corre-

sponding 2-TRACK IN jack.

2 PHASE

This button switches the input signal of the corre-

sponding 2-TRACK IN jack between normal/

inverted phase. This can be set independently for L

and R.

3 SRC (sample rate converter)

This is an on/off switch for the sample rate converter

provided on each 2-TRACK IN jack.

This will be displayed as “ON” when the converter is

being used, or “THROUGH” when it is not being

used. This SRC button cannot be operated if 2-

TRACK IN connector 3 is selected as the word clock

master.

4 Fs (sampling frequency)

This indicates the sampling frequency of the signal

that is input from the corresponding 2-TRACK IN

jack.

5 SOURCE (2TR IN 1/2 only)

These buttons select the input jack that will be used

for 2TR IN 1/2.

The following input jacks correspond to each button.

• ANALOG............ 2-TRACK IN ANALOG L/R

jacks

• AES/EBU............ 2-TRACK IN DIGITAL AES/

EBU jacks

• COAXIAL........... 2-TRACK IN DIGITAL COAX-

IAL jacks