User Manual

OUT PATCH (output patch) functions

OUT PATCHOUT INSERTOUT EQOUT COMPOUT DELAY

OUT DCA/MUTE

MATRIX/STOUT CH VIEW

Hint

If PATCH CONFIRMATION is turned on in the

UTILITY function PREFERENCE screen, a popup

window will ask you for conﬁrmation each time you

attempt to change the patch settings.

You may patch a single output channel to multiple

output jacks. However you may not patch multiple

output channels to a single output jack.

6 OUTPUT UNIT/SLOT/CH (output unit/slot/chan-

nel)

From the top, these indicate the type and ID number

of the output unit, the slot number, and the channel

number of the output jack. The abbreviations dis-

played in the output unit column have the following

meanings.

• OUTx (DIO8).....DIO8 digital input/output unit

(x is the unit ID number)

• OUTx (AO8).......A08 analog output unit

(x is the unit ID number)

• EFF ......................Send to the internal effects 1–8

By clicking the buttons at either end of the

output unit/slot rows, you can switch the display by

units. By clicking the buttons you can switch

the display by slots.

7 PATCH LIBRARY button

This button is used to access the PATCH LIBRARY

window, where you can store/recall patch status as a

library (→p.172).