User Manual

OUT COMP (output compressor) function
93
OUT PATCHOUT INSERTOUT EQOUT COMPOUT DELAY
OUT DCA/MUTE
MATRIX/STOUT CH VIEW
OUT COMP (output compressor) function
Compressor settings for output channels
COMP PRM (compressor parameters)
[Function]
Make compressor settings for the selected output channel.
■ Console
In the LCD FUNCTION ACCESS
block, press the OUTPUT [COMP]
switch (press repeatedly until the
screen shown at the right appears)
■ Display
MENU button → OUTPUT COMP
button → COMP PRM tab
[Screen functions]
1 SEL (channel select)
This button accesses the CH SELECT popup win-
dow, allowing you to select the channel to which
your operations will apply.
2 Level meters
These meters show the amount of gain reduction, the
peak levels before and after the compressor, and the
peak level of the key-in signal (the reference signal
that operates the compressor). When the signal clips,
the corresponding CLIP segment will light.
Hint
In the case of two paired channels, or if either the
STEREO A or STEREO B channels are selected, level
meters for two channels will be displayed.
In the UTILITY function PREFERENCE screen, you
can specify whether the GR meter display will be
linked to the compressor on/off setting. If linking is
turned on, the GR meter will be displayed only when
the compressor is on, and will be hidden when the
compressor is off. If linking is turned off, the GR
meter will always be displayed.
1
2
3