User Manual
Output functions
94
3 Output channel number and short name
This shows the number, the short name, and the
pairing status of the currently selected output chan-
nel. You can click the heart symbol to enable/defeat
pairing.
4 Typ e
This indicates the type of the currently selected com-
pressor.
Hint
Normally, you will switch the compressor type by
recalling a different type of compressor in the COMP
LIBRARY window. It is not possible to change the
type in this screen.
5 COMP ON/OFF (compressor on/off)
This button switches the compressor on/off.
6 Graph
This is a graph showing the settings of the various
compressor parameters.
7 INPUT FILTER
These filters modify the signal that is processed by
the compressor. Use the buttons located at the right
to select the type of filter (HPF/LPF) and the on/off
setting. Use the knob located at the left to set the cut-
off frequency (common to LPF/HPF).
If LPF is on, the compressor will be applied to the
signal that has passed through the LPF, and will then
be mixed with the signal that has passed through the
HPF. If HPF is on, the compressor will be applied to
the signal that has passed through the HPF, and will
then be mixed with the signal that has passed
through the LPF.
In this case, the cutoff frequency of the LPF and HPF
will be linked.
• If COMP is on and LPF is also on
• If COMP is on and HPF is also on
Hint
If you wish to use the compressor as a de-esser, select
SELF POST EQ in the KEY IN SELECT section.
8 THRESHOLD (threshold level)
This sets the reference level at which the compressor
will operate. When the key-in signal exceeds this
level, the input signal will begin to be compressed.
When the key-in signal drops below this level, com-
pression will be defeated.
9 RATIO
Specify the ratio at which the input signal will be
compressed when the key-in signal exceeds the
threshold level.
0 AT TACK (attack time)
Specify the time from when the key-in signal exceeds
the threshold until compression begins.
5 4
6
87 9 0 A B
C
LPF COMP
HPF
SELF POST EQ Key-in signal
LPF
HPF
COMP
SELF POST EQ Key-in signal