User Manual

118

Input functions

IN PATCH functions

Assign input/output units to input channels/insert I/O/direct out

INPUT PATCH

[Function]

Patch the input jacks of the input units, 2TR IN jacks, effect returns, and talkback to the desired input channel

(monaural/stereo).

■ Console

In the LCD FUNCTION ACCESS

block, press the INPUT [PATCH]

switch (press repeatedly until the

screen shown at the right appears)

■ Display

MENU button → INPUT PATCH

button → INPUT PATCH tab

[Screen functions]

1 CH (input channel)

This is the number of the patch destination input

channel.

The channel number of the grid where the cursor is

currently located will be highlighted.

2 Short name

The short name assigned to each input channel is

displayed here. You can also click this area to assign a

short name/long name.

3 SELECTED PATCH (currently selected patch)

This shows the input channel number/long name for

the grid location of the cursor.

4 Grid

This grid allows input jacks (horizontal lines) to be

patched to input channels (vertical columns). Cur-

rently-patched grids are indicated by a ● symbol.

Move the cursor to the desired grid, and press the

[ENTER] switch (or click) to set/cancel the patch.

3 5