User Manual
IN PATCH functions
125
IN PATCHIN HA/INSERTIN EQ
IN GATE/COMP
IN DELAYIN DCA/MUTE
PAN/ROUTING
IN CH VIEW
4 INSERT I/O POINT
For each input channel, select the insert I/O point
(the location in the signal path at which the external
device will be inserted) from the following choices.
• PRE EQ ...............Immediately before the EQ
• POST EQ ............Immediately after the EQ
• PRE COMP.........Immediately before the com-
pressor
• PRE DELAY ........Immediately before the delay
• PRE FADER........Immediately before the fader
5 DIRECT OUT POINT
For each input channel, select the direct point (the
location in the signal patch from which direct output
will occur) from the following choices.
• PRE EQ ...............Immediately before the EQ
• PRE FADER........Immediately before the fader
• POST FADER.....Immediately after the fader
• POST ON............Immediately after the [ON]
switch
4 5