User Manual

Input functions
126
INSERT/DIRECT VIEW
[Function]
While viewing the block diagram displayed on-screen, select the insert I/O point and direct point of the
desired input channel.
■ Console
In the LCD FUNCTION ACCESS
block, press the INPUT [PATCH]
switch (press repeatedly until the
screen shown at the right appears)
■ Display
MENU button → INPUT PATCH
button → INSERT/DIRECT VIEW
tab
[Screen functions]
1 SEL (channel select)
This button accesses the CH SELECT popup win-
dow, allowing you to select the input channel to
which your operations will apply.
Hint
When this screen is first accessed, the input channel
selected by INPUT [SEL] on the console will be dis-
played. If you change the applicable input channel in
this screen, the console will also be affected.
2 Input channel number and short name
This shows the number, the short name, and the
pairing status of the currently selected input channel.
You can click the heart symbol to enable/defeat pair-
ing.
3 Unit, card, channel type and number
This displays the unit type and number, card num-
ber, and input jack channel number assigned to the
currently selected input channel.
4 Unit, card, channel type and number
This displays the unit type and number, card num-
ber, and input/output jack channel number assigned
to the insert out/insert in of the currently selected
input channel.
3
1
2
4