User Manual

Input functions
138
[Procedure]
Copying EQ settings to an input channel within
the same tab (Example: copying from ch.1 to
ch.8)
1. Drag the mini-graph from the copy source input
channel and drop it onto the copy destination input
channel.
A window will appear, asking you to confirm the
copy. To execute the copy, click the OK button. To
cancel, click the CANCEL button.
2. Click the OK button, and the settings will be cop-
ied.
Copying EQ settings to an input channel located
in a different tab (Example: copying from ch.19
to ch.44)
1. Drag the mini-graph from the copy source input
channel onto the tab of the copy destination.
It is not possible to copy the data by dropping it on
any screen other than the CH 1-24, CH 25-48, CH
49-72, CH 73-96 or ST IN 1-8 screens that are dis-
played when you press the INPUT [EQ] switch in
the LCD FUNCTION ACCESS block of the CS1D
console.
2. The copy destination tab screen will appear.
3. Drag and drop the mini-graph onto the copy desti-
nation input channel.
A window will appear, asking you to confirm the
copy. To execute the copy, click the OK button. To
cancel, click the CANCEL button.
4. Click the OK button, and the settings will be cop-
ied.