User Manual

PAN/ROUTING function
155
IN PATCHIN HA/INSERTIN EQ
IN GATE/COMP
IN DELAYIN DCA/MUTE
PAN/ROUTING
IN CH VIEW
[Screen functions]
1 Pairing
Pairing can be selected or defeated for adjacent odd-
numbered → even-numbered MIX buses.
Click the heart-shaped symbol, and a popup window
will appear in which you can confirm the action of
selecting or defeating pairing.
2 FIX/VARI indicator
This selects the MIX bus type for two adjacent odd-
numbered → even-numbered MIX buses.
When you click the FIX/VARI button, the MIX BUS
MODE SELECT popup window will appear, and you
can select OK to switch between the following two
types.
• FIX
The send level of the MIX bus will be fixed.
Select this when you use the MIX bus as a group out-
put, or as a bus output for recording to a multi-track
recorder.
• VARI (variable)
The send level of the MIX bus will be variable.
Select this when you use the MIX bus as a send to an
external effect, or as a foldback output.
If Recall Safe is set for one of two adjacent odd-
numbered → even-numbered MIX channels,
recalling a scene may cause VARI/FIX settings to
differ between the odd-numbered and even-num-
bered channels. If this occurs, the settings after
recall will take priority.
3 Send level
In this section, the signal that is sent from the input
channel/ST IN channel (vertical column) to the MIX
bus (horizontal line) can be switched on/off, and its
send level can be adjusted.
The buttons and knobs displayed in this section will
change depending on the type (FIX or VARI) of the
destination MIX bus, and on the pairing status of the
MIX buses.
3
1
2
MIX buses
(send destination)
Input channel/ST IN channels (send source)