User Manual

PATCH LIBRARY
173
Basic library
operation
UNIT
LIBRARY
PATCH
LIBRARY
NAME
LIBRARY
INPUT EQ
LIBRARY
OUTPUT EQ
LIBRARY
INPUT GATE
LIBRARY
INPUT COMP
LIBRARY
OUTPUT COMP
LIBRARY
INPUT CH
LIBRARY
OUTPUT CH
LIBRARY
EFFECT
LIBRARY
GEQ
LIBRARY
• INSERT OUT .....Insert out (output channel)
patch data
3 Library list
This shows the numbers and names (titles) of the
patch data currently stored in the library.
The highlighted number indicates the data that is
currently selected.
4 STORE/RECALL buttons
These buttons store/recall patch data.
Each button has the following function.
• RECALL
Load the currently selected patch data from the
library list into the PM1D system.
• Recall will not occur if a unit is not installed, or if a
unit is installed with input/output reversed.
• Similarly, recall will not occur if a card is not
installed, or if a card is installed with input/output
reversed.
• A patch will be recalled even if the recall source
library contents differ from the type of unit or card
that is installed or virtually-set for the recall destina-
tion channel.
• STORE
Store all patch data of the PM1D system to the num-
ber currently selected in the library list. When you
click this button, the LIBRARY STORE popup win-
dow will appear, allowing you to assign a name to the
patch data.
If EVENT RECALLING is set to ENABLE in the TC
EVENT screen, it is not possible to press the
STORE button.
• TITLE EDIT
This edits the title of the patch data currently selected
in the library list.
The TITLE EDIT button is valid only if data has
actually been stored in the number selected in the
library list. If a number with no data is selected, the
button text will be gray, and the button cannot be
used.
• APPLY EDIT
Store the edited content of the PATCH LIBRARY
window back into the same library number.
Hint
The APPLY EDIT button is valid only if the data of
the number selected in the library list has been
edited. If un-edited data is selected, and if a number
marked “READ ONLY” is selected, the button text
will be gray, and the button cannot be used.
5 EDIT
When you edit the patch data selected in the library
list (3), this area will indicate “EDIT.”
6 EXIT
This button exits the PATCH LIBRARY window and
returns to the previous screen.
65
4
3