User Manual

Effects Parameters
21
Effects Parameters
These are the parameters used to edit each effect.
• REVERB [Type: STEREO]
• EARLY REF. [Type: STEREO]
Parameter Range Description
REVERB TYPE
Small Hall, Large Hall, Vocal Plate,
Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
Reverb type
REV TIME 0.3 - 99 [s] Reverb time
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
HI.RATIO 0.1 - 1.0 Reverb time for high-frequency portion
LO.RATIO 0.1 - 2.4 Reverb time for low-frequency portion
DIFFUSION 0 - 10 Reverb diffusion (left–right reverb spread)
DENSITY 0 - 100 [%] Reverb density
FREQ. 0.05 - 40.00 [Hz] Modulation frequency
DEPTH 0 - 100 [%] Modulation depth
MOD DELAY 0.0 - 30.0 [ms] Delay time applied to modulation
ER. DELAY 0.0 - 100.0 [ms] Delay between early reflections and reverb
ER. BALANCE 0 - 100 [%]
Balance of early reflections and reverb
(0%= ER., 100%= reverb)
GATE LEVEL OFF, –60 - 0 [dB] Level at which gate kicks in
ATTACK 0 - 120 [ms] Gate opening speed
HOLD
0.02ms - 1.96s(@fs=48kHz),
0.02ms - 2.13s(@fs=44.1kHz)
Gate open time
DECAY
5.0ms - 42.3s(@fs=48kHz),
6.0ms - 46.0s(@fs=44.1kHz)
Gate closing speed
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
Parameter Range Description
ER. TYPE
Small Hall, Large Hall, Random,
Reverse, Plate, Spring
Type of early reflection (ER.) simulation
ROOM SIZE 0.1 - 20.0 Reflection spacing
LIVENESS 0 - 10 Early reflections decay characteristics (0= dead, 10= live)
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
DIFFUSION 0 - 10 Reverb diffusion (left-right reverb spread)
DENSITY 0 - 100 [%] Reverb density
ER. NUM. 1 - 34 Number of early reflections
FB.DELAY 0.0 - 1000.0 [ms] Feedback delay time
FB.LEVEL –99 - +99 [%] Feedback gain
HI.RATIO 0.1 - 1.0 High-frequency feedback ratio
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
SPACE MOD 0 - 10 Modulation depth
BALANCE WAT 0 - 100 [%] Wet/dry balance