User Manual
Effects Parameters
29
• REV ➔ FLANGE [Type: MIX]
*1
• FREQ. is calculated from the [TEMPO] and [NOTE].
• REV + SYMPHONIC [Type: MIX]
*1
• FREQ. is calculated from the [TEMPO] and [NOTE].
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
modulation speed
REVERB TYPE
Small Hall, Large Hall, Vocal Plate,
Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
Reverb type
REV TIME 0.3 - 99 [s] Reverb time
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
HI.RATIO 0.1 - 1.0 Reverb time for high-frequency portion
DENSITY 0 - 100 [%] Reverb density
FREQ. 0.05 - 40.00 [Hz] Modulation speed
NOTE *1
Used in conjunction with TEMPO to determine modulation
speed
DEPTH 0 - 100 [%] Modulation depth
MOD DELAY 0.0 - 500.0 [ms] Delay time applied to modulation
FB.LEVEL –99 - +99 [%]
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
WAVE Sine, Tri Modulation waveform
FLG-REV BAL. 0 - 100 [%]
Reverb and flanged reverb balance
(0%= flanged reverb, 100%= reverb)
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
Parameter Range Description
TEMPO 20 - 300
Tempo (BPM) value that is the basis for calculating the
modulation speed
REVERB TYPE
Small Hall, Large Hall, Vocal Plate,
Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
Reverb type
REV TIME 0.3 - 99 [s] Reverb time
INI.DELAY 0.0 - 500.0 [ms] Initial delay before reverb begins
HI.RATIO 0.1 - 1.0 Reverb time for high-frequency portion
DENSITY 0 - 100 [%] Reverb density
FREQ. 0.05 - 40.00 [Hz] Modulation speed
NOTE *1
Used in conjunction with TEMPO to determine modulation
speed
DEPTH 0 - 100 [%] Modulation depth
MOD DELAY 0.0 - 500.0 [ms] Delay time applied to modulation
WAVE Sine, Tri Modulation waveform
SYM:REV BAL. 0 - 100 [%]
Reverb and symphonic balance
(0%= symphonic, 100%= reverb)
HPF Thru, 21 - 8.0k [Hz] High-pass filter cutoff frequency
LPF 50 - 16.0k, Thru [Hz] Low-pass filter cutoff frequency
BALANCE WAT 0 - 100 [%] Wet/dry balance
3
3
3
3
3
3