User Manual

CS1D Operating Manual (Basic Operation)
4
Signal flow in the PM1D system
The following diagram shows the general signal flow within the PM1D system.
1 The signals input to the AI8 analog input unit are AD
converted, and then sent as multi-channel digital
audio signals to the DSP1D-EX {DSP1D} engine.
2 The signals sent to the DSP1D-EX {DSP1D} engine
are processed by mixing, routing, EQ/dynamics/
effects.
3 In general, the operation of the engine and of the
input unit is controlled from the CS1D console.
Hint
The signals that are input from the 2-TRACK IN
DIGITAL jacks 1–6 and 2-TRACK IN ANALOG
jacks 1/2 of the CS1D can also be sent to the engine.
4 The signals processed by the engine are DA con-
verted by the output unit, and sent to the speaker
system, foldback system, or recording system.
Hint
Signals can also be output from the STEREO OUT
DIGITAL jacks or MONITOR OUT ANALOG jacks
of the CS1D.
When a DIO8 digital input/output unit is used, the
same unit will be used both as an input unit and out-
put unit, so that the signal flow will be as shown on
the next page.
INPUT
1~10
INPUT
OUTPUT
1~6
OUTPUT
CONTROL
I/O
DIGITAL I/O
ENGINE A
INPUT UNIT NO.
PHANTOM MASTER
ON
OFF
+48V
POWER
ON/ OFF
12345 678
ANALOG INPUT BOX
12345 6 7
OUTPUT UNIT NO.
INPUT SELECTOR
A
B
POWER
ON/ OFF
8
ANALOG OUTPUT BOX
1
2
3
4
CONTROL
I/O
DIGITAL I/O
CONSOLE
I/O
Mic Line device Speaker system foldback
AI8 analog input unit
DSP1D-EX {DSP1D}
engine
AO8 analog output unit
Console (CS1D)
Analog audio signal
Digital audio signal
Control signal