User Manual

ManualsBrandsYamaha ManualsBrass & WoodwindsPM1

Table Of Contents

RIVAGE PM Editor Installation Guide 1

RIVAGE PM Editor Installation Guide

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE.

YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT.

THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).

BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND

BY THE TERMS OF THIS LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR

OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO

THE TERMS, PROMPTLY DELETE THE SOFTWARE.

1. GRANT OF LICENSE AND COPYRIGHT

Yamaha hereby grants you the right to use the software program(s) and data (“SOFTWARE”) accompanying this Agreement.

The term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by

Yamaha and/or Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you

are entitled to claim ownership of the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected

under relevant copyrights.

• You may use the SOFTWARE on your computer(s).

• You may make one or a reasonable number of copies of the SOFTWARE in machine-readable form for backup purposes only,

if the SOFTWARE is on media where such backup copy is permitted. On the backup copy, you must reproduce Yamaha's

• You may permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and

the recipient reads and agrees to the terms of this Agreement.

2. RESTRICTIONS

• You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the

SOFTWARE by any method whatsoever.

• You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative

works of the SOFTWARE.

• You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with

other computers.

• You may not use the SOFTWARE to distribute illegal data or data that violates public policy.

• You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation.

Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the

following restrictions which you must observe.

• Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright

owner.

• Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed

for listeners in public without permission of the copyright owner.

• The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be

modified without permission of the copyright owner.

3. TERMINATION

This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any

copyright law or provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without

notice from Yamaha. Upon such termination, you must immediately destroy the licensed SOFTWARE, any accompanying written

documents and all copies thereof.

4. DISCLAIMER OF WARRANTY ON SOFTWARE

You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related

documentation are provided “AS IS” and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS

AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED,

INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE AND NON- INFRINGEMENT OF THIRD PARTY RIGHTS.

SOFTWARE LICENCING AGREEMENT

Summary of content (7 pages)

PAGE 1
RIVAGE PM Editor Installation Guide SOFTWARE LICENCING AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”). BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE.
PAGE 2
SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. 5. LIMITATION OF LIABILITY YAMAHA'S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF.
PAGE 3
About RIVAGE PM Editor RIVAGE PM Editor (hereinafter referred to as “PM Editor”) is a software program that allows you to preconfigure the RIVAGE PM system on your computer (offline editing) and to monitor or operate the RIVAGE PM system (online monitoring/operation). Connecting the RIVAGE series control surface and a computer with PM Editor to the RIVAGE PM system simultaneously allows you to control the system from both units.
PAGE 4
Installing the PM Editor and making the network settings System Requirements OS Windows 7, Windows 8.1, Windows 10 OS X 10.9.x, OS X 10.10.x, OS X 10.11.x, macOS 10.12.x, macOS 10.13.x CPU Windows: Intel 64-bit processors running at 2 GHz or faster Mac: Intel Core family processor RAM 2 GB or more HDD 1 GB or more Display 1280 x 1024 or higher resolution, 16-bit or higher color depth Others Pointing device (mouse, etc.
PAGE 5
Network Settings Make the following network settings when connecting a computer with the PM Editor installed to the RIVAGE PM system. TCP/IP settings of the computer IP address 192.168.53.1 – 192.168.53.32 Subnet mask 255.255.255.0 Making TCP/IP settings for the computer  Windows 1 Access the Control Panel, then click or double-click [Network and Sharing Center] or [View network status and tasks]. The “Network and Sharing Center” window is called up.
PAGE 6
Connection and Activation 1 Use an Ethernet cable to connect the computer with PM Editor to the RIVAGE PM system. DSP Engine DSP-R10 or Console Network Computer with PM Editor Control Surface Connect the computer where PM Editor is installed to the DSP engine. To establish a connection with the DSP engine, connect the cable to the NETWORK terminal (PC) located next to the TO CONSOLE terminal. Never connect the cable to the NETWORK terminal above the HY card slots.
PAGE 7
Uninstalling the Software (Deleting the Application)  Windows Use the “Control Panel” to uninstall RIVAGE PM Editor. Go to “Control Panel”  “Programs and Features” or “Uninstall a program,” select the items you wish to delete, and click [Uninstall]. Next, a dialog box appears. Follow the instructions on the screen to delete the application. If the “User Account Control” window appears, click [Continue] or [Yes].  Mac Double-click “Uninstall RIVAGE PM Editor.app” which is included in the installer.