User Manual
Table Of Contents
- Additions/changes in V1.5
- Changes to the constantly-displayed screen
- DUAL CONSOLE mode added
- Cascade connections
- Using GPI (General Purpose Interface)
- Fader Start function
- Tap Tempo function
- Added functions in the USER DEFINE screen
- Input channel panel assignments
- Horizontal pair and vertical pair
- Mix minus
- Job select
- Auto Store function
- Global Paste function
- Parameter control via CONTROL CHANGE and NRPN
- Manual Fading function
- Unit name
- Matrix send shortcuts
- DCA mute indicator
- Oscillator improvements
- Improvements in the INPUT PATCH / OUTPUT PATCH screens
- USB PC (computer) connection
- Automatic scrolling in the CH to MIX screen and MATRIX/ST ROUTING screen
- ON/OFF button for COMM IN
- Added functions in the PREFERENCE screen
- Supplementary explanation for existing functions
- Scene Memory/Effect Library to Program Change Table
- MIDI control change NRPN (Non Registered Parameter Number) assignment table
- MIDI control change parameter assignment table
- MIDI Data Format
PM1D System Software V1.5 Supplementary Manual
82
Matrix send shortcuts
In the previous version, the send level of a signal sent from a MIX channel / STEREO A/B channel to a
MATRIX bus could be controlled only from the screen. However, version 1.5 provides a shortcut that lets you
use panel encoders to control this.
There is a shortcut for controlling the send level from a single MIX channel to each of the MATRIX buses, and
another shortcut for controlling the send level from each of the MIX channels to a single MATRIX bus.
■ Single MIX channel → each MATRIX
bus
In the MIX OUTPUT block of the panel, press and hold
the [SEL] switch of the MIX channel that is sending the
signal.
After you have held down the [SEL] switch for a time,
the MATRIX OUTPUT block MATRIX [NAME] indica-
tor will alternately display “SEND” and the short name
of MATRIX channel.
In the case of a paired MATRIX channel, the [NAME]
indicator of the odd-numbered channel will alternately
display “PAN” and the short name of that MATRIX
channel.
While you continue to hold down the switch, use the
MATRIX OUTPUT block MATRIX [LEVEL/BAL]
encoders to adjust the send level or pan from the selected
MIX channel to each of the MATRIX buses. (The send
level value is shown by the LEDs surrounding the
MATRIX [LEVEL/BAL] encoder.)
Hint
In the same way, you can hold down the STEREO
OUTPUT block STEREO A/B [SEL] switch and use
the MATRIX [LEVEL/BAL] encoders to adjust the
send level of the signal from the STEREO A/B chan-
nel to each MATRIX bus.
If you are using the controls of the MIX OUTPUT
block to edit effect parameters, the above shortcut
cannot be used. However, you can still use the
shortcut of holding down the STEREO A/B [SEL]
switch.
MIX OUTPUT block
PAIR
ON O
PAIR
ON ON
SEND SEND
Alternately displays “SEND”
and the short name of MATRIX
channel 1.
Alternately displays “SEND”
and the short name of MATRIX
channel 2.
Indicates the send level of the
signal that is sent from MIX chan-
nel 1 to MATRIX bus 1.
Indicates the send level of the
signal that is sent from MIX
channel 1 to MATRIX bus 1.
Use this knob to adjust the send
level of the signal that is sent from
MIX channel 1 to MATRIX bus 2.
Indicates the send level of the
signal that is sent from MIX
channel 1 to MATRIX bus 2.
MATRIX OUTPUT block