User Manual

6
2.4. <Step3> Edit converted file
When converted files are loaded, some parameters (e.g. Pair/Channel Link, Patch,
Wordclock) are given their default setting or a substitute setting. Before starting to mix, such
parameters may need editing. Here is an example:
- Step 3a. Load the converted file into destination console, Studio Manager, CL Editor, QL
Editor, or RIVAGE PM Editor.
Tips
Specific libraries and scenes can be loaded individually.
- Open the required scene or library from the Scene window or Library window on the
CL Editor or QL Editor.
- Load the required scene or library on the LOAD SELECT window.
- Load the required scene or library from a USB flash drive on the CL/QL/RIVAGE PM
LOAD SELECT window.
- Load the required scene or library from a memory card on the PM5D LOAD window.
- Load the converted file into Studio Manager, then on the SCENE window or
LIBRARY window, save the required individual scene or library. Synchronise with the
LS9/M7CL/PM5D, and load the scene or library when ready.
- Step 3b. After recalling the first Scene in the conversion range, edit Input Patch and Output
Patch including Insert/Direct out/Effect patch, and store the Scene. Also, change the Key In
Source if necessary.
Tips
With PM5D, store the edited Patch setting to the Input Patch/Output Patch library
which is linked to the Scene in order to avoid being overwritten by other Scene recalls.
In the case of M7CL/LS9/CL/QL/RIVAGE PM, apply Recall Safe for patches.
If you use multiple Patch settings in the range of scenes, create multiple Library Links
in PM5D. Alternatively, utilize the Focus Recall function in M7CL/LS9/CL/QL/RIVAGE
PM to recall the desired Patch.
- Step 3c. Edit Pair/Channel Link setup in each converted Scene by recalling, editing and
storing one by one. (For conversion between PM5D/RIVAGE PM and other models)
- Step 3d. Edit Focus/Selective Recall setup in each Scene (for partial recall purpose) if
necessary.
- Step 3e. Re-apply additional Recall Safe settings for other parameters depending on the
original reason for using Recall Safe in the source file.
- Step 3f. In RIVAGE PM, HA settings (Gain and Phantom) are not converted.