User Manual

ManualsBrandsYamaha ManualsMixersPM5D V2, PM5D-EX

PM5D system software V1.20 includes the following changes and additions relative to V1.04 (changes up to V1.12 are also included).

Use ENCODER [ON] keys to turn phan-

tom power (+48V) on/off (from V1.05)

A “USE ENCODER-ON AS +48V” option has been added

to the PREFERENCE 1 screen. If this option is on, and HA

(head amp input sensitivity) is selected as the encoder

mode, you can use the ENCODER [ON] key located above

each encoder to turn phantom power supply (+48V) on/off.

Switch parameter value indication on/

off in the Name display (from V1.05)

A “CHANNEL NAME NUMERIC DISPLAY” field has been

added to the PREFERENCE 2 screen. In V1.04 and earlier,

operating the fader or encoder (pan setting) of each chan-

nel caused the name display to show the value of that

parameter. In V1.05 and later, turning the “ENCODER

VALUE” and “FADER VALUE” options off will prevent the

respective parameter value from appearing when you oper-

ate the fader or encoder.

Select the monitor source from the

panel (from V1.05)

When selecting a monitor source from the panel in V1.04 or

earlier, you could simultaneously select one source from

[2TR A1]–[2TR D3] or [DEFINE] and one source from

[STEREO A]/[STEREO B] (including LCR), for a maxi-

mum total of two sources. In V1.05 and later, turning on

one key will turn off the other keys, allowing you to select a

single monitor source more rapidly. If you want to select

two sources simultaneously (as in V1.04 and earlier), press

the corresponding panel keys simultaneously, or use the

MONITOR screen.

HA follows Recall Safe on/off operations

(from V1.05)

A new SAFE KEY MODE SELECT section has been added

to the RECALL SAFE screen. If you turn on the HA+CH

button, using the [RECALL SAFE] key of the panel or the

RECALL SAFE button in the CH VIEW screen (INPUT

VIEW function) to turn Recall Safe on/off will now also

turn on/off the Recall Safe setting for the HA patched to the

corresponding channel. If the CH button is on, the HA

Recall Safe setting will not be linked.

DCA group name Recall Safe and Selec-

tive Recall can be switched on/off (from

V1.05)

A new WITH NAME button has been added to the DCA

area of the RECALL SAFE screen and SELECTIVE RECALL

screen. This allows you to exclude just the DCA group name

from DCA group Recall Safe and Selective Recall. If the

WITH NAME button is on, Recall Safe and Selective Recall

will apply to the DCA group names of DCA groups for

which these functions are on. If the WITH NAME button is

off, DCA group names are excluded from Recall Safe and

Selective Recall.

PM5D V1.20 Supplementary Manual

Summary of content (4 pages)

PAGE 1
PM5D V1.20 Supplementary Manual PM5D system software V1.20 includes the following changes and additions relative to V1.04 (changes up to V1.12 are also included). Use ENCODER [ON] keys to turn phantom power (+48V) on/off (from V1.05) HA follows Recall Safe on/off operations (from V1.05) A “USE ENCODER-ON AS +48V” option has been added to the PREFERENCE 1 screen.
PAGE 2
Displaying output channel names (from V1.20) The OUTPUT PATCH function now includes a NAME screen that enables you to name output channels and view channel names on various screens. The procedure functions the same as the NAME screen for the INPUT PATCH function. However, the NAME screen is not included in the CH COPY, GLOBAL PASTE, or CSV IMPORT/EXPORT function. Parameter operation for Recall Safe/ Selective Recall (from V1.
PAGE 3
DME series monitor source selection and EXTERNAL CUE on/off (from V1.05) A MONITOR button and monitor source select button have been added to the DME CONTROL screen. When you click the monitor source select button ( ), the MONITOR POINT SELECT window will appear, letting you select the DME series unit monitor source. If the MONITOR button is on, the EXTERNAL CUE indicator in the upper part of the display will turn on, and the monitor signal of the DME series unit will be sent to the PM5D’s CUE bus.
PAGE 4
List of parameters available for Pair or Recall Safe operation The following table illustrates which parameters for the paired channels can be linked and which settings for each parameter can be selected for Recall Safe operation. : Parameters of paired channels are linked. – : Parameters cannot be linked, or selected for Recall Safe operation.