User Manual

PM5D/PM5D-RH Owner’s Manual Reference section 215
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
This screen contains various settings and indications for
2TR IN / 2TR OUT.
A Input level meters
These indicate the input level of 2TR IN DIGITAL
jacks 1–3 and 2TR IN ANALOG jacks 1–2.
B FREQUENCY (Sampling frequency)
Indicates the sampling frequency of the input signal
from 2TR IN DIGITAL jacks 1–3.
C SRC (Sampling Rate Converter)
These are on/off switches for the sampling rate con-
verters built into 2TR IN DIGITAL jacks 1–3.
(If turned off, this indicates “THROUGH.”)
D EMPHASIS STATUS
Indicates whether emphasis processing is being applied
to the input signal from 2TR IN DIGITAL jacks 1–3.
E Output level meter
Indicates the output level of 2TR OUT DIGITAL jacks
1–3.
F SRC (Sampling Rate Converter)
These are on/off and output frequency select switches
for the sampling rate converters built into 2TR OUT
DIGITAL jacks 1–3. As the output frequency you can
select either 44.1 kHz or 48 kHz. The on/off button
selects either ON or THROUGH (off).
G Fs (Sampling frequency)
This indicates the sampling frequency at which the
PM5D is operating.
2TR I/O screen
2TR I/O
1
2
3
4
5
6
7