User Manual

OUTPUT INSERT function
224 PM5D/PM5D-RH Owner’s Manual Reference section
OUTPUT INSERT function
Here you can make settings for the internal HA (PM5D-
RH model only) or external HA assigned to the insert-in of
an output channel or MONITOR L/C/R channel.
A +48V
Switches phantom power (+48V) on/off for each
channel.
B HPF (High Pass Filter)
Turns the HPF on/off for each channel.
C Cutoff frequency
Specifies the HPF cutoff frequency for each channel.
Move the cursor to the box, and turn the [DATA]
encoder to adjust the cutoff frequency in a range of 20–
600 Hz.
D GAIN
Adjusts the gain for each channel. Move the cursor to
the knob, and turn the [DATA] encoder to adjust the
attenuation in a range of +10 dB to –62 dB. The cur-
rent value is shown in the box below each knob.
Note
Since settings 1 – 4 are for the patched input port, they are
linked for channels that are patched to the same port.
E Input port
This indicates the type and number of the input port
assigned to the insert-in of that channel.
Note
• Items 1 – 4 are not shown for channels to whose insert-in
nothing is patched, or for channels patched to an input port
that does not have a HA. Items
2 and 3 are not shown for
channels patched to a port that has no high pass filter.
• Use the INSERT PATCH screen (OUTPUT PATCH func-
tion) to patch an input port to an insert-in.
F Channel
This is the number of the channel you are editing. Two
paired channels are indicated by a heart symbol dis-
played between them.
Note
HA settings are not linked even if two channels are paired.
However, the GAIN knob setting is linked for HAs whose
GANG button is turned on in the HA screen (SYS/W.CLOCK
function).
Hint
The HA settings you edit in this screen are also reflected in
the HA screen (SYS/W.CLOCK function).
INSERT IN MIX 1-24 screen
INSERT IN MATRIX/STEREO/MONI-
TOR screen
INSERT IN MIX1-24
INSERT IN MATRIX/STEREO/MONITOR
1
2
3
5
6
4