User Manual

PM5D/PM5D-RH Owner’s Manual Reference section 235
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
Here you can specify the output channels that will be
assigned to mute groups 1–8. Muting can be switched on/
off together for channels assigned to the same mute group.
A Mute group
This area shows the mute group number. The number
corresponding to the grid where the cursor is located is
highlighted.
B MUTE (Mute master)
These buttons switch muting on/off for each mute
group. These buttons are linked with the SCENE
MEMORY [1]–[8] keys of the panel (if the MUTE
MASTER button is On in the constantly-shown area at
the bottom of the display).
Hint
When you turn muting on, channels belonging to that mute
group will behave just as though their panel [ON] key had
been turned off; no signal will be output. During this time, the
panel [ON] key LED will blink.
C Grid
This grid lets you assign output channels (horizontal
rows) to mute groups (vertical columns). Currently-
patched grids are indicated by a symbol. Move the
cursor to the desired grid and press the [ENTER] key
(or click) to set/cancel the assignment.
D MUTE SAFE
These buttons temporarily defeat the muted state of a
channel. When a button is displayed as “–”, clicking it
will change its display to “ON,” and the corresponding
output channel will be excluded from mute groups.
Clicking the button once again restores the original
state.
Note
Normally, Mute Safe operations can be performed indepen-
dently of the scene memory.
Hint
Mute groups 1–8 can be used with both input channels and
output channels. Both types of channel can exist in the identi-
cally-numbered mute group.
E SET BY CUE (Assign by [CUE] key)
This specifies whether the [CUE] key will be used to
make/cancel mute group assignments. While the mute
group SET BY CUE button is on, pressing the [CUE]
key of a channel that can be assigned to the corre-
sponding group will assign the channel to the group.
(Press the [CUE] key once again to cancel the
assignment.)
Hint
The SET BY CUE button can be turned on for only one mute
group. This is automatically turned off when you change
screens or turn off the power.
F CLEAR
This button clears all output channels assigned to that
mute group.
G DIRECT RECALL/MUTE MASTER
This is the same function as the DIRECT RECALL/
MUTE MASTER buttons located at the bottom of the
display (➥ p.151).
MUTE GROUP ASSIGN screen
MUTE GROUP ASSIGN
321
4
65
7