User Manual

PM5D/PM5D-RH Owner’s Manual Reference section 237
Information shown
in the display
Function
menu
Global
functions
Output
functions
Input
functions
Appendices
Here you can specify the output channels that will be
assigned to compressor link groups A–H. Compressor
parameters are linked for channels belonging to the same
group.
A Compressor link group
This area shows the compressor link group number.
The number corresponding to the grid where the cur-
sor is located is highlighted.
B Grid
This grid lets you assign output channels (horizontal
rows) to compressor link groups (vertical columns).
Currently-patched grids are indicated by a symbol.
Move the cursor to the desired grid and press the
[ENTER] key (or click) to set/cancel the assignment.
Hint
Input channels and output channels use separate compres-
sor link groups. Output channels use groups A–H, and input
channels use groups 1–8.
C SET BY CUE (Assign by [CUE] key)
This specifies whether the [CUE] key will be used to
make/cancel compressor link group assignments.
While the compressor link group SET BY CUE button
is on, pressing the [CUE] key of a channel that can be
assigned to the corresponding group will assign the
channel to the group. (Press the [CUE] key once again
to cancel the assignment.)
Hint
The SET BY CUE button can be turned on for only one com-
pressor link group. This is automatically turned off when you
change screens or turn off the power.
D CLEAR
This button clears all output channels assigned to that
compressor link group.
COMP LINK ASSIGN (Compressor link
assign) screen
COMP LINK ASSIGN
12
43