User Manual

PAN/ROUTING function
276 PM5D/PM5D-RH Owner’s Manual Reference section
❏ Type = VARI, Pairing = disabled ❏ Type = VARI, Pairing = enabled
SEND ON/OFF button
On/off switch for the signal sent from input
channels to each MIX bus.
PRE/POST button
Selects either PRE (pre-EQ or pre-fader) or
POST (post ON or post TO ST) as the loca-
tion from which the signal will be sent from
input channels to each MIX bus.
SEND LEVEL knob
Adjusts the level of the signal sent from
input channels to each MIX bus.
Input channel 1
↓
MIX bus 1
Input channel 1
↓
MIX bus 2
Input channel 2
↓
MIX bus 1
Input channel 2
↓
MIX bus 2
MIX1 MIX2 STEREO L STEREO R
……
……
ON
ON
ON
PAN
MIX1 (VARI)
LEVEL
MIX2 (VARI)
LEVEL
MIX1 MIX2 STEREO L STEREO R
……
……
FADER
ON
ON
ON
PAN
MIX1 (VARI)
LEVEL
MIX2 (VARI)
LEVEL
FADER
INPUT CHANNEL 1
INPUT CHANNEL 1
• PRE/POST button= PRE
• PRE/POST button= POST
Input channel 1
↓
MIX buses 1/2
Input channel 2
↓
MIX buses 1/2
SEND ON/OFF
button
On/off switch for
the signal sent
from input chan-
nels to the two
MIX buses.
PRE/POST button
Selects either PRE (pre-EQ or pre-fader) or POST
(post ON or post TO ST) as the location from which the
signal will be sent from input channels to each MIX bus.
MIX PAN/BALANCE knob
Specifies the panning of the signal sent
from input channels to the two MIX
buses. If the PAN MODE (
9) of the
input channel is set to BALANCE, this
functions as a BALANCE knob that
adjusts the volume balance between
the two channels.
SEND LEVEL knob
Adjusts the level of the signal
sent from input channels to the
two MIX buses.
MIX1 MIX2 STEREO L STEREO R
……
……
MIX1 MIX2 STEREO L STEREO R
……
……
INPUT CHANNEL 1
FADER
INPUT CHANNEL 1
ON
ON
PAN
PAN
MIX1/2 (VARI)
LEVEL
FADER
ON
ON
PAN
PAN
MIX1/2 (VARI)
LEVEL
• PRE/POST button= PRE
• PRE/POST button= POST