User Manual

8 Input Patch / Output Patch operations

68 PM5D/PM5D-RH Owner’s Manual Operating section

Click the grid where the desired patch-source

and patch-destination intersect.

The SELECTED PATCH area in the upper left of the

screen shows the output port and output channel for

the grid at which the cursor is located.

When you click a grid, a window will ask you to con-

firm that you want to change the patch setting.

Hint

If you want to change the patch directly without having to

respond to the confirmation window, go to the UTILITY func-

tion PREFERENCE 1 screen and turn PATCH

CONFIRMATION off (

➥

p.186).

Click the OK button in the window.

The new patch will be finalized, and a “ ” symbol will

appear at the corresponding grid. To cancel the patch,

click the “ ” symbol once again.

Note

You can patch an output channel to more than one output

port, but you cannot patch multiple output channels to a sin-

gle output port.

Output port

Output channel

number