User Manual

PM5D/PM5D-RH Owner’s Manual Operating section 85

Scene memory

❏ Other parameters

A DCA/GEQ/EFFECT

These buttons specify whether DCA groups, GEQ

modules, and internal effects will be excluded from (or

subject to) Recall.

B MUTE MASTER

This button specifies whether the Mute Master key on/

off status will be excluded from (or subject to) Recall.

C MIDI REMOTE

These buttons specify whether MIDI remote layers A–

D will be excluded from (or subject to) Recall.

D SET ALL

This button turns on all buttons for parameters 1–3.

E CLEAR ALL

This button turns off all buttons for parameters 1–3.

In the upper left of the screen, switch the

SELECTIVE RECALL ENABLE/DISABLE button to

ENABLE.

When this button is set to ENABLE, the Selective Recall

function will apply to subsequently-stored scenes.

Store the current scene.

The settings of the SELECTIVE RECALL screen will be

saved as part of the scene. When you recall this scene,

only the selected channels/parameters will be excluded

from (or subject to) Recall.

Note

• If you edit the settings of the SELECTIVE RECALL screen,

you must store that scene in order to make your changes

effective.

• Recall Safe and Selective Recall can be used together.

Channels/parameters excluded from recall operations by

either Recall Safe or Selective Recall (or both) will not be

recalled.