User Manual

PM5DV2/DSP5D Editor Owner’s Manual

In this window you can view and edit the parameters of ST IN channels 1–4. You can use the [View] menu to choose

the parameters that will be displayed in the window.

A Input patch

Selects the input source that will be assigned to the ST IN channel. The input sources

that can be assigned are the same as for an input channel (➥ p.8).

B +48V

Switches on/off the phantom power (+48V) of the internal HA (PM5D-RH model and

DSP5D only) or of the external HA (AD824, AD8HR) patched to the ST IN channel.

C HA GAIN

Drag the knob in the screen to adjust the gain of the internal HA (PM5D-RH model

and DSP5D only) or of the external HA (AD824, AD8HR) patched to the ST IN chan-

nel.

D HPF (High Pass Filter)

Switches the high pass ﬁlter on/off. You can drag the numeric value up or down to edit

the cutoff frequency.

E Ø (Phase)

Inverts the phase of the signal after AD conversion.

F INSERT

Switches the INSERT PATCH path between enabled/disabled.

G DIRECT

Switches the output to the DIRECT OUT PATCH port between enabled/disabled.

ST IN window