User Manual

PM5DV2/DSP5D Editor Owner’s Manual

In this window you can view and edit the parameters of DCA groups 1–8.

A DCA number

This is the number of the DCA group.

B MUTE

This switches DCA group muting on/off. This is linked with the DCA [MUTE] keys in

the DCA strip section of the PM5D panel.

C DCA group name

This is a text box that displays the DCA group name. You can also edit the DCA group

name in this text box.

D DCA fader

This fader adjusts the level of the DCA group. This is linked with the DCA faders in the

DCA strip section of the PM5D panel.

The current fader value is shown in the numeric box immediately below the fader.

When you hold down the <Ctrl> key ( key) and <Shift> key of your computer key-

board and click a fader, the corresponding fader will be set to nominal level (0 dB). If

you hold down the <Ctrl> key ( key) and click the fader, the corresponding fader

will be set to –∞. When the fader is at nominal level, the N character at the right of the

fader is displayed in green.

If a DCA group is set to Recall Safe, the R character at the lower right of the fader is dis-

played in orange.

E CUE

This button cue-monitors the DCA group. This is linked with the DCA [CUE] keys in

the DCA channel strip of the PM5D panel.

DCA window