User Manual

PM5DV2/DSP5D Editor Owner’s Manual

M COMP LINK GROUP (Compressor link group)

Selects the compressor link group (1–8) to which that channel belongs.

N KEY IN

Selects the signal that will be used as the key-in signal. The types of signal that can be selected are the same as for

the gate key-in signal (➥ p.24).

❏ INSERT (except for FX RTN channels)

A HA GAIN (head amp gain) and +48V

Here you can adjust the HA gain for the input (if it has HA) that is patched to INSERT IN, and turn +48V on/off.

B ON (On/off)

Enables/disables insert-in/out.

C OUT (Insert out)

Here you can select the output port that will be assigned to insert-out, from the following choices.

D IN (Insert in)

Here you can select the input port that will be assigned to insert-in, from the following choices.

E POINT (Insert point)

Selects the position at which insert-in/out will be patched. Choose from Pre EQ, Post EQ, Pre Delay, or Post

Fader.

NONE No assignment

MIXOUT1...MIXOUT24

The channels of MIX OUT jacks 1–24

This cannot be selected on the DSP5D

OMNIOUT1...OMNIOUT24

The channels of OMNI OUT jacks 1–24

This cannot be selected on the DSP5D

S1-1, S1-2...S4-15, S4-16 Output channels of an I/O card installed in slots 1–4

FX1L, FX1R...FX8L, FX8R L/R inputs of internal effects 1–8

GEQIN1...GEQIN20 Inputs of GEQ modules 1–20

2TR D1L, 2TR D1R...2TR D3L, 2TR D3R

L/R channels of 2TR OUT DIGITAL jacks 1–3

This cannot be selected on the DSP5D

NONE No assignment

AD1–AD48 INPUT jacks 1–48

AD1L, AD1R...AD4L, AD4R The L/R channels of ST IN jacks 1–4.

S1-1, S1-2...S4-15, S4-16 Input channels of an I/O card installed in slots 1–4

FX1L, FX1R...FX8L, FX8R L/R outputs of internal effects 1–8

GEQOUT 1–20 Outputs of GEQ modules 1–20

2TR D1L, 2TR D1R...2TR D3L, 2TR D3R

L/R channels of 2TR IN DIGITAL jacks 1–3

This cannot be selected on the DSP5D

2TR A1L, 2TR A1R, 2TR A2L, 2TR A2R

L/R channels of 2TR IN ANALOG jacks 1/2

This cannot be selected on the DSP5D

1 2