User Manual

PM5DV2/DSP5D Editor Owner’s Manual

❏ CH to MIX (Channel to mix)

A MIX send level

This adjusts the send level of the signal sent from the input channel to VARI-type MIX buses. The current value is

shown in the numerical box immediately above.

B Pair

This indicates the pairing status of adjacent odd-numbered/even-numbered MIX channels. You can click the

heart symbol to enable/disable pairing.

C ON (MIX send on/off)

This is an on/off switch for the signal sent from the input channel to the MIX bus.

D PRE (Pre/Post)

This selects PRE or POST as the point from which the signal is sent from the input channel to the MIX bus.

E CH to MIX PRE POINT

This selects PRE EQ or PRE FADER as the point from which the signal is sent when the PRE button (4) is set to

PRE.

If the PRE button is set to POST, you can select either POST ON or POST TO ST as the signal send loca-

tion individually for each MIX bus (

➥

p.35).

NOTE