User Manual

PM5DV2/DSP5D Editor Owner’s Manual

❏ Pan / Fader

A BALANCE

This adjusts the left/right output balance of paired channels. This is not shown if pair-

ing is not speciﬁed.

B ON

This switches the MATRIX channel on/off. This is linked with the MATRIX [ON] keys

in the MATRIX section of the PM5D panel.

C Fader

This adjusts the output level of the MATRIX channel. This is linked with the MATRIX

encoders in the MATRIX section of the PM5D panel. The current value is shown in the

numerical box immediately below. A level meter is shown beside the fader.

D CUE

This button cue-monitors the signal of the MATRIX channel. This is linked with the

MATRIX [CUE] keys in the MATRIX section of the PM5D panel. If SOLO is active, this

will function as SOLO.

If a STEREO A/B channel is selected

❏ CHANNEL SELECT (Channel selection)

Except for the fact that your editing applies to a STEREO A/B channel, this is the same as the channel selection for

an input channel (➥ p.22).