User Manual

PM5DV2/DSP5D Editor Owner’s Manual

❏ STEREO to MATRIX

A MATRIX send level

Here you can adjust the send levels of the signals sent from the STEREO A/B channels to the MATRIX bus.

B Pair

This indicates the pairing status of adjacent odd-numbered/even-numbered MATRIX channels. You can click the

heart symbol to enable/disable pairing.

C ON (MATRIX send on/off)

This is an on/off switch for the signal sent from the STEREO A/B channel to the MATRIX bus.

D POINT (Send point)

Selects the point from which the signal is sent from the STEREO A/B channel to the MATRIX bus. You can choose

PRE FADER (immediately before the fader), POST FADER (immediately after the fader), or POST ON (immedi-

ately after the STEREO [ON] key).