User Manual

PM5DV2/DSP5D Editor Owner’s Manual

A Input channel number

Input channel name

This is the number and name of the input channel. You can click the channel name box to edit the name in this

page.

B Input port

This shows the input port assigned to the input channel. You can click this box and choose the input port from

the popup menu that appears.

C Output channel number

Output channel name

This is the number and name of the output channel. You can click the channel name box to edit the name in this

page.

D Output port

This shows the output port assigned to the output channel. You can click this box and choose the output port

from the popup menu that appears.

E IMPORT (Import a CSV ﬁle)

Input patch, output patch, and channel name data from CSV ﬁles written by the PM5D can be loaded into the

PATCH LIST page by clicking this button.

When you click this button, a dialog box will appear as shown at right,

allowing you to specify the folder containing the CSV ﬁles you want to

load.

Specify the folder that contains CSV ﬁles, and click the OK button. If

the speciﬁed folder contains CSV ﬁles, that data will be loaded into

the PATCH LIST page.

If the speciﬁed folder does not contain the necessary CSV ﬁle,

the settings in the PATCH LIST page will not change. For

example if the folder contains only an input patch CSV ﬁle, only

the input patch settings of the PATCH LIST page will be loaded,

and the remaining settings will not change.

F EXPORT (Export a CSV ﬁle)

By clicking this button, input patch, output patch, and channel name data can be written to a CSV ﬁle that can be

loaded by the PM5D.

When you click this button a dialog box will appear, allowing you to specify a folder for the exported CSV ﬁles.

Specify the folder in which the CSV ﬁles will be saved, and click the OK button. Separate CSV ﬁles containing the

input patch, output patch, and channel name data will be saved in the folder you speciﬁed. You can use a memory

card to load these CSV ﬁles into the PM5D.

NOTE