User Manual

PM5DV2/DSP5D Editor Owner’s Manual

For PEQ

K PEQ graph

This graph shows the response of the currently selected module.

L HPF (High Pass Filter) button

If this button is on, band 1 or 5 will change to a high-pass ﬁlter. The Q knob for 1 or 5 will disappear, and the

GAIN knob will operate as a switch that turns the high-pass ﬁlter on/off.

M Low Shelving button

If this button is on, band 1 or 5 will change to a shelving-type ﬁlter. (The Q knob for 1 or 5 will disappear.)

N PEQ knobs

The three knobs Q, F (center frequency), and G (gain) specify the response for each of the eight bands. You can

edit the value by using the mouse to operate the knobs, or by double-clicking the value and typing the desired

value.

O LPF (Low Pass Filter) button

If this button is on, band 4 or 8 will change to a low-pass ﬁlter. The Q knob for 4 or 8 will disappear, and the

GAIN knob will operate as a switch that turns the low -pass ﬁlter on/off.

P High Shelving button

If this button is on, band 4 or 8 will change to a shelving-type ﬁlter. (The Q knob for 4 or 8 will disappear.)

Q TYPE I / TYPE II (EQ type)

Here you can select either TYPE I (the same algorithm as on the previous 02R series) or TYPE II (a newly devel-

oped algorithm) as the EQ type.

R EQ FLAT button

This button resets all gain controls to the 0 dB position.