User Manual

PM5DV2/DSP5D Editor Owner’s Manual

M MIX BALANCE

Adjusts the balance of the effect sound relative to the original sound. 0 (%) outputs only the original sound, and

100 (%) outputs only the effect sound.

N BYPASS

This button temporarily bypasses the effect.

O CUE

This button cue-monitors the output of the currently selected effect.

P TEMPO

If a tempo-type or modulation-type effect is selected, this allows you to adjust time-related parameters such as

DELAY (delay time) and FREQ. (modulation speed).

To set the value of the TEMPO parameter, you can either input the BPM (Beats Per Minute) in the numerical box,

or repeatedly click the TAP TEMPO button at the desired tempo.

If the MIDI CLK button is on, the TEMPO parameter value will synchronize to the MIDI timing clock being

received from the MIDI port.

Q PLAY/REC (Play/Record) buttons

If “042 FREEZE” is selected as the effect type, you can use these buttons to record and play back the signal being

input to the effect.

MON