User Manual

PM5DV2/DSP5D Editor Owner’s Manual

Undo/Redo Function

In PM5D/DSP5D Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of the latest

operation (Redo). If you perform an Undo operation twice in a row, you can cancel the two most-recent operations.

If you perform an Undo operation three times in a row, you can cancel the three most-recent operations. In this way,

you can cancel multiple recent operations.

The following table describes how to use the Undo/Redo function.

Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo

any previous operation:

•Operations on the PM5D/DSP5D itself

• Quitting Studio Manager

•Changing the surround mode or pair mode

•Synchronizing with the PM5D/DSP5D itself

•Session operations

•The GEQ [EQ FLAT] button

•Moving the fader positions by changing the GEQ variable width

You cannot Undo or Redo the following operations:

• Edits in the Setup window

• Synchronization

• Opening and closing the windows

• Resizing the windows

• Ch Copy/Ch Paste

• Ch Move

For some functions, there are also other operations that cannot be undone.

For Library and Scene operations, Undo/Redo will apply only to the single preceding operation. You can-

not undo an operation that occurred two or more operations previously. Undo/Redo in these windows can

be performed only using the [UNDO] button in the respective window. Even if you execute a scene recall

from the Sync window, you cannot use a shortcut or menu operation to undo this.

Other Functions

❏

Resetting to the default value (Ctrl ( ) + click)

Move the cursor to a control or a parameter value, then hold down the <Ctrl> ( ) key and click the mouse but-

ton to reset the value to the default (e.g., to reset an Input Channel fader to –

∞

dB, or reset a pan setting to Cen-

ter).

❏

Ctrl ( ) +Shift+Click

Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> ( ) key and <Shift> key and click

the mouse button to reset the value to the nominal level.

Undo

Choose [Undo] from the [Edit] menu.

Redo

Choose [Redo] from the [Edit] menu.

NOTE