User Manual

PM5DV2/DSP5D Editor Owner’s Manual

In this window of the editor you can edit and view the DSP5D’s word clock settings.

Choose [Windows] → [System] → [Word Clock] to access this window.

DSP5D Editor does not have a corresponding window.

A MASTER CLOCK SELECT

This selects the master clock that will be used; either the internal clock or an external clock received via a connec-

tor or slot. This setting will determine the sampling rate at which the DSP5D will operate. You can select the fol-

lowing items.

The status (operating condition) of each clock is indicated by the color of the symbol located at the left of each

button. Each color has the following signiﬁcance.

• LOCK ( )

This indicates that a clock synchronized with the source selected in

1 is being input. If an external device is

connected to the corresponding connector/slot, input/output is occurring correctly between that device and

the DSP5D. If the sampling rate is close, this status may be shown even if the source is not synchronized.

Indication (button) Content

DSP5D’s internal clock (sampling rate = 96 kHz)

DSP5D’s internal clock (sampling rate = 88.2 kHz)

DSP5D’s internal clock (sampling rate = 48 kHz)

DSP5D’s internal clock (sampling rate = 44.1 kHz)

Word clock supplied from the WORD CLOCK IN connector

Word clock supplied from the CASCADE IN (D-sub) connector

Word clock supplied from the CASCADE IN (RJ-45) connector

SLOT 1–SLOT 2

Clock data from a digital audio signal supplied via a digital I/O card in slots 1–2 (can be

selected in two-channel units)

Word Clock window

1 23