User Manual

PM5DV2/DSP5D Editor Owner’s Manual

H OUTPUT SOLO SAFE

Here you can select the output channels that will be excluded from solo operations (multiple selections are

allowed). These buttons correspond to the following output channels.

Solo safe settings and cue on/off settings are linked for two paired channels. Solo safe operations can be

performed independently of scene memories.

I Level meter

This is a peak level meter that indicates the level of the signal being output from the CUE OUT jacks. As the point

at which the level is detected, you can choose either immediately before the delay provided on the MONITOR/

CUE bus output (when the PRE DELAY button is on), or immediately after it (when the POST DELAY button is

on).

J MONITOR/CUE DELAY

Here you can make settings for the delay function that is provided on the MONITOR/CUE output. Use the knob

to specify the delay time (0–1000 msec), and use the DELAY button to turn the delay on/off. If the AUTO BYPASS

button is on, the delay will be automatically bypassed when you perform a cue operation.

K CUE LEVEL

This adjusts the output level of the cue signal.

L CUE OUT

This switches the cue output on/off.

MIX 1–24 MIX channels 1–24

MATRIX 1–8 MATRIX channels 1–8

STEREO A/B STEREO A/B channels

SET ALL Activates solo safe for all output channels

CLEAR ALL Defeats solo safe for all output channels

HINT