User Manual

PM5DV2 Editor Installation Guide 3
The PM5DV2 Editor enables you to remotely monitor/control the Yamaha PM5D mixing console with firmware V2,
save the parameter settings on your computer, and also prepare the PM5D settings beforehand by editing the
parameters offline.
Make sure the firmware of PM5D console is V2, and update the firmware if required.
For subsequent operations, refer to the PDF manual from the [HELP] menu in each software program.
Minimum System Requirements
Windows Vista / 7
Windows XP
Mac OS X (for PowerPC)
PM5DV2 Editor
Installing the Software
Procedures Windows
1
Verify that your system meets the operating requirements of each software program. page 3
2
Install the USB-MIDI Driver to your computer. page 4
3
Install the Studio Manager and each Editor. page 5
4
Configure the PM5D console. page 7
5
Start up the Studio Manager, then start up the Editor. page 7
Software installation
OS Windows 7 : Ultimate/Professional/Home Premium
Windows Vista : Ultimate/Enterprise/Business/Home Premium/Home Basic
Windows XP : Professional SP2 or later/Home Edition SP2 or later/Tablet PC Edition 2005
Mac OS X : 10.4 or later (10.5.8/10.6.x for the PM5DV2 Editor V2.2.6 or higher)
Hard Disk Space 100MB or more
Display 1,024 x 768 pixels or higher; High Color 16-bit or higher
Other Pointing device such as a mouse, USB port
CPU 32bit : 1.4GHz or higher Intel Core/Pentium/Celeron family processor
64bit : Intel 64 compatible processor
Available Memory 1GB or more (2GB or more on Windows 7 64bit)
CPU 800MHz or higher Intel Core/Pentium/Celeron family processor
Available Memory 512MB or more
CPU PowerPC G4 or higher
Available Memory 512MB or more
Other Execute the PowerPC when using the Editor V2.2.5 or earlier.