Owner's Manual

PM5DV2/DSP5D Editor Owner’s Manual

In this window you can select the insertion destination of GEQ modules 1–20, and edit the parameters. The number

of GEQ modules will depend on the “Number of Effects” setting speciﬁed in the Mixer Setup window.

A MODULE (Module selection)

Selects the GEQ module that you want to edit or view.

B GEQ/PEQ (GEQ/PEQ select button)

This switches the module between GEQ operation or PEQ operation.

GEQ lets you use 31 bands to specify the module’s response, and PEQ lets you use eight bands.

C INSERT (Insert destination)

Select one of the following as the insert destination for the currently selected GEQ module.

D ON (GEQ on/off)

Switches the currently selected GEQ module on/off.

E LINK

This button links the settings of the adjacent odd-numbered/even-numbered GEQ modules. When you click this

button, a window will appear, asking you to conﬁrm the operation. Click the appropriate button to choose the

source/destination module for the parameters that will be copied. If you click the RESET BOTH button, the

parameters of both modules will be reset to their default value.

F LIBRARY

This button access the GEQ LIBRARY window in GEQ mode, or the OUTPUT EQ LIBRARY window in PEQ

mode.

NONE Not inserted

INS CH1...INS CH48 Input channel 1–48 insert in/out

INS STIN1L, INS STIN1R...INS STIN4R ST IN channel 1–4 (L/R) insert in/out

INS MIX1...INS MIX24 MIX channel 1–24 insert in/out

INS MTRX1...INS MTRX8 MATRIX channel 1–8 insert in/out

INS STAL, INS STAR STEREO A channel (L/R) insert in/out

INS STBL, INS STBR STEREO B channel (L/R) insert in/out

INS MON L, INS MON R, INS MON C MONITOR channel (L/R/C) insert in/out

GEQ window

2 3 6541