Owner's Manual

E-14
Adjusting the Projection Angle
Prior to Adjustment
• After reading the owner’s manual for the projector, turn the projector on, and project an image.
• Check the INSTALLATION item in the SETUP menu, and set the installation status. If projecting from
the front of the unit, select “FRONT/CEILING;” if projecting from the rear of the unit, select “REAR/
CEILING.”
• Select a projection size using the zoom feature, and then adjust the angle.
1 Adjust the horizontal angle.
Adjust the projector so that the projected image is centered horizontally on the screen, and then tighten the
horizontal angle adjustment screws.
10˚
10˚
Maximum angle of
adjustment: ±10˚
(PMT-L11)
(PMT-H15)
Horizontal angle adjustment screws
Left
Right
12PMT_BODY_E 5/29/1, 9:16 AM14