Owner's Manual

E-13
English
5 Attach the safety brackets.
Align the safety brackets so that the mounting guide pin fits into the hole, and then use the four safety
bracket mounting screws (M4, pan head) to secure the brackets. (Use two screws on the left side and two
screws on the right.)
(PMT-L31)
Safety bracket mounting screw
(M4, pan head)
Safety bracket
6 Temporarily secure the projector mounting adapter.
Use the four vertical angle adjustment screws (M6, hexagonal head) provided to temporarily secure the
projector mounting adapter. (Use two screws on the left side and two screws on the right.)
(PMT-L31)
Vertical angle adjustment screw
(Hand-tighten the other side also.)
Projection
direction
12PMT_BODY_E 2002.10.16, 17:3713